Publicidad
Idiomas disponibles
Idiomas disponibles
4. Operation
4.6 LCD Panel Abbreviations
Abbreviation
Display content
ENA
DIS
ATO
BAT
NCF
CF
SUB
ADD
ON
OFF
FBD
OPN
RES
4.7 Setup Menu
Press and hold the Test/Up and Mute/Down buttons simultaneously for longer than one second to enter/exit the Setup Menu.
There are three parameters to set up the UPS. Refer to the illustration below.
Parameter 1 is for program alternatives. Refer to below tables for the programs to set up.
Parameter 2 and Parameter 3 are the setting options or values for each program.
The display will time out after 10 minutes of inactivity. This feature is always enabled.
Note: Use the "Up" or "Down" button to change the programs or parameters.
Meaning
Enable
Disable
Auto
Battery
Normal Mode (not CVCF
Mode)
CVCF Mode
Subtract
Add
On
Off
Not allowed
Allow
Reserved
Parameter 1
Parameter 2
Abbreviation
Display content
N.L
CHE
OP .V
PAR
RN
SN
TN
RS
ST
TR
HS.H
TOL
RED
Parameter 3
34
Meaning
Neutral line loss
Check
Output voltage
Parallel, 001 means the
first UPS
The first phase
The second phase
The third phase
The first line
The second line
The third line
Hot standby
Total UPS Number
Redundancy Number
Publicidad
