Publicidad
Idiomas disponibles
Idiomas disponibles
3. Installation and Setup
3.1 Unpacking and Inspection
Unpack the unit and inspect the contents. Packaging may include additional accessories and components, depending on specific
customer orders.
• One (1) UPS
• One (1) Owner's Manual
• One (1) RS-232 Cable
• One (1) 1.5 m battery cable kit extension (included with 30K and 40K models only)
Cabling for UPS Paralleling:
• One (1) parallel cable (only available for parallel model) for every set of UPS units being paralleled
• One (1) shared current cable (only available for parallel model) for every set of UPS units being paralleled
Other Accesory and Component Options Available
Additional Charging Board to increase the battery charger capacity:
• 4A charger boards may be paralleled to increase the charger's current capacity. For more information, refer to ACCESSORIES in section
8. Specifications.
Note: Do not turn on the unit. Make sure to inspect the unit prior to installation. Ensure nothing inside the package was damaged during transportation.
Notify the carrier and dealer immediately if there is any damage or missing parts. Please keep the original packaging in a safe place for future use.
Rear Panel View - 30K and 40K Models
30K Rear Panel
40K Rear Panel
7
1
RS-232 Communications Port
2
USB Communications Port
3
Emergency Power Off (EPO) Connector
4
Share Current Port for Paralleling Units
5
Parallel Ports for Paralleling Units
6
SNMP Slot for Network Monitoring using
(Optional WEBCARDLX)
7
External Battery Cabinet Connector
8
Input Circuit Breaker
9
Maintanance Bypass Switch
(for Service Personnel Use Only)
10
Input/Output Terminal
(Refer to
11
and
12
11
Input Terminal
12
Output Terminal
(Connects to Mission-critical Loads)
13
Input Grounding Terminal
14
Output Grounding Terminal
15
* Input 2 Circuit Breaker
16
* Input 2 Terminal (Bypass Input)
*Input 2 (Bypass Input) and Input 2 Circuit Breaker
for "KXD" dual input models only.
30K and 40K Input/Output Terminals
for Details)
Publicidad
