Pioneer DEH-P4800MP Manual De Instrucciones página 13

RDS
Introduction of RDS operation
4 3 2
RDS (radio data system) is a system for provid-
ing information along with FM broadcasts.
This inaudible information provides such fea-
tures as program service name, program type,
traffic announcement standby and automatic
tuning, and is intended to aid radio listeners in
finding and tuning in to a desired station.
1 Program service name
Shows the name of broadcast program.
2 TP indicator
Shows when a TP station is tuned in.
3 TA :ON indicator
Shows when TA (traffic announcement
standby) function is on.
4 AF indicator
Shows when AF (alternative frequencies
search) function is on.
% Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
BSM (best stations memory)REG (regional)
LOCAL (local seek tuning)TA (traffic an-
nouncement standby)AF (alternative fre-
quencies search)
# To return to the frequency display, press
BAND.
# If MW/LW band is selected, you can only se-
lect BSM or LOCAL.
! If you do not operate the function within about
1
! RDS service may not be provided by all sta-
! RDS functions such as AF and TA are only ac-
Switching the RDS display
When you tune in an RDS station its program
service name is displayed. Switch the display
to find out the frequency.
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Program service namePTY information
Frequency
# The frequency of the current station appears
on the display for eight seconds.
Selecting alternative
frequencies
If you are listening to a broadcast and the re-
ception becomes weak or there are other pro-
blems, the unit will automatically search for a
different station in the same network which is
broadcasting a stronger signal.
! The default setting for AF is on.
1
Press FUNCTION until AF appears in the dis-
play.
2
Press a and AF :ON is displayed.
Notes
30 seconds, the display is automatically re-
turned to the frequency display.
tions.
tive when your radio is tuned to an RDS
station.
Press FUNCTION to select AF.
Press a to turn AF on.
Section
05
13
En