Publicidad
Idiomas disponibles
Idiomas disponibles
2610056809 GSR GSB18V-975C 03-21.qxp_GSB18V-975C 3/5/21 4:33 PM Page 14
Mode Selector Switch
The mode selector switch allows the tool to be
set for various drilling or driving applications.
Turn the mode selector switch right or left
depending on the below applications (Fig. 9).
SELECTOR
Drill only action: This mode will lock up
the clutch to permit drilling and driving
heavy duty work, and also will enable
bits to be changed quickly and easily
in the keyless chuck
Driver mode: To drive screws, nuts, and
bolts with use of the adjustable clutch
settings.
Drill with hammer action (GSB18V-
975C and GSB18V-755C Models only):
For drilling in concrete, asphalt, tile or
other similar hard materials. The
hammer drill position overrides the
clutch for drilling.
14
Operating Instructions
MODE
SWITCH
FIG. 9
SAVE THESE INSTRUCTIONS
Adjustable Clutch
Your tool features 25 clutch settings. Output
torque will increase as the clutch ring, is
rotated from 1 to 25. The tool will stop rotating
as soon as the set torque is reached during
operation (Fig. 10).
ADJUSTABLE
CLUTCH
Brake
When the trigger switch is released it activates
the brake to stop the chuck quickly. This is
especially useful in the repetitive driving and
removal of screws.
Built in LED Work Light
Your tool is also equipped with an LED light that
turns on automatically when the switch is
activated, for better visibility when drilling/
driving (Fig. 1). The light turns off automatically a
short time after the trigger is released. You can
adjust this time frame using Bosch Tool Box app.
See "Connectivity" section.
FIG. 10
Publicidad
