Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLING THE JAR
1. Turn jar upside down so the small opening is at the top. (Figure 1)
2. Place sealing ring over jar opening. (Figure 2)
3. Place blade into jar. (Figure 3)
4. Place threaded jar bottom over blade and turn clockwise to tighten. (Figure 4)
5. Place jar assembly onto base. (Figure 5)
6. Place ingredients into jar.
7. P lace lid with filler cap on jar.
8. Plug the power cord into a standard household outlet of the same voltage as the one
indicated in the rating plate of your blender. You are now ready to begin using your
blender!
Figure 1
Figure 5
FOR BRAZIL MODELS ONLY:
1. Turn jar upside down so the small opening is at the top. Place sealing ring over jar
opening.
2. Turn the integrated blade assembly with threaded jar bottom upside down and place
into the bottom of the jar. Turn clockwise while pushing down to tighten. Be sure the
integrated blade assembly with threaded jar bottom is locked securely to the jar before
use.
3. Place the jar onto the base.
BLSTSE75_20SEPM1 (LA).indd 5
BLSTSE75_20SEPM1 (LA).indd 5
Figure 2
Figure 3
5
Figure 4
11/6/20 10:16
11/6/20 10:16
Publicidad
