Descargar Imprimir esta página

Canon WP-DC42 Guia Del Usuario página 16

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
Do not insert the camera with the strap attached.
Do not press the buttons or lever with unnecessary
force when using the case underwater.
Do not spray the waterproof seal with tap-water.
Do not damage the waterproof seal, or allow dirt to
accumulate between the waterproof seal and the
case.
Do not disassemble or modify the Waterproof Case.
The above actions could cause leaks.
Avoid using or storing the
Waterproof Case in the following
places.
Depths exceeding 40 meters
(130 ft.).
Places subject to temperatures
above 40 °C (104 °F).
Avoid placing, or storing the
Waterproof Case in the following
places.
Places subject to strong sunlight.
Humid or dusty areas.
Near substances such as
napthalene or insecticides
Do not drop or throw the Waterproof Case.
The above actions may warp the case and cause malfunctions.
Use only the supplied silicon grease.
Use of other waterproofing products may impair the strength
of the Waterproof Case.
Waterproof Seal
Debris stuck to the waterproof seal may cause water
leakage. Catching a single strand of hair, or a tiny grain of
sand in the seal can cause leaks.
If you notice that the waterproof seal is damaged or
cracked, stop using the case immediately and contact a
Canon Customer Support Help Desk.
When storing your Waterproof Case, keep it open to
prevent the waterproof seal from deforming and to
maintain its waterproof capabilities.
Protect the waterproof seal from dust and scratches during
storage.
To ensure that the case remains watertight, you should
replace the seal once a year.
Please contact a Canon Customer Support Help Desk
for replacement seals.
3

Publicidad

loading