Descargar Imprimir esta página

Stanley SIG 1100 Traducción Del Manual Original página 20

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 125
G
B
9.7 Storage
1. Empty the petrol tank using a petrol suction
pump.
Important: Do not empty the petrol tank in
enclosed areas, near fire or when smoking.
Petrol fumes can cause explosions and fire.
2. Start the engine and run it until the tank and fuel
line are completely empty and the engine stalls.
3. Let the generator cool down.
4. Remove the spark plug and pour approx. 20 ml
of engine oil into the cylinder.
5. Pull the starter handle slowly several times to
coat the internal parts.
6. Screw the spark plug back in.
7. Store the generator in a well-ventilated, safe place.
9.8 Transport
1. Wait until the generator has cooled down.
2. Always transport the generator in the upright
position.
9.9 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
Type of generator.
Article number of the generator.
10. Disposal and recycling
The generator is supplied in packaging to
prevent its being damaged in transit. This
packaging is raw material and can therefore
be reused or can be returned to the raw
material system.
The generator and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
20

Publicidad

loading

Este manual también es adecuado para:

Sig 3050Sig 2000