Publicidad
Idiomas disponibles
Idiomas disponibles
Picture Adjust > Gamma
Gamma
07
Sets the gradation characteristics of the projected image. (Cannot set when the "Picture Mode" in "THX".)
Normal
A
B
C
D
Custom 1
Custom 2
Custom 3
(Gamma Setup)
●
"Normal" is suitable for normal circumstances but other settings can be selected according to your preferences.
●
This setting can also be configured from the remote control. (
* "Gamma Adjustment"
1 Select the reference gamma curve coefficient (1.8 ~ 2.6) in "Correction Value".
2 Select the color to be adjusted in the gamma adjustment screen.
Picture Adjust
Gamma
Normal
Correction Value
A
White
B
Red
C
Geen
D
Blue
Costom1
Copy
Costom2
Paste
Costom3
Reset
Exit
Operate
MENU
Select
3 Adjust the gamma curve in the gamma curve adjustment screen.
Picture Adjust
Gamma
Normal
Correction Value
A
White
B
Red
C
Geen
Blue
D
Costom1
Copy
Costom2
Paste
Costom3
Reset
Input: 10%
Output:100
Exit
Back
MENU
Select
Operate
Select the point where the gradation (brightness)
is to be adjusted with the
●
You can switch between "Before" and "After" using the [TEST] button of the remote control.
4 To end
BACK
●
If gamma curve is adjusted repeatedly, calculation errors will be accumulated and the gamma curve may not be able to
revert back to its original form. In that case, select "Reset".
Downloaded From projector-manual.com JVC Manuals
All manuals and user guides at all-guides.com
For normal circumstances, select this
setting.
Set gamma to "A".
Set gamma to "B".
Set gamma to "C".
Set gamma to "D".
Three different kinds of gamma can be set according to your preferences.
Correction
The coefficient (1.8 to 2.6) of the gamma curve can be selected.
Value
The gamma curve for the colors (Red, Green, Blue) can be adjusted
Gamma
separately.
Adjusting "White" will adjust for all "Red, Green, Blue" values. The
Adjustment*
gamma curve displays the value for "Green".
Copy
Copy the adjusted gamma data.
Paste
Paste the copied gamma data.
Return the gamma coefficients to the values 2.2 set by "Correction
Reset
Value".
2.2
1023
512
0
50
100(%)
Back
Check
Before
BACK
TEST
2.2
1023
512
0
50
100(%)
Back
Check
Before
BACK
TEST
/
buttons.
Save gamma data?
BACK
Yes
This is the setting for Standard Tones.
This is the setting for expressing rich dark
tones.
This is the setting for the characteristic
tonal qualities of film.
This setting provides even richer darker
tones than setting B.
This setting provides brighter midtones.
P14)
Picture Adjust
Gamma
Normal
Correction Value
2.2
A
White
1023
B
Red
Geen
C
Blue
D
512
Costom1
Copy
Costom2
Paste
Costom3
Reset
0
50
100(%)
Input: 50%
Output: 580
Exit
Back
Back
Check
After
MENU
BACK
TEST
Select
Operate
Adjust the gradation (brightness) with
the
/
buttons.
OK
No
ENGLISH
33
Publicidad
