Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning and Replacing the Filter
Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur.
1
Remove the inner filter
2
Clean the filter
●
Wash the filter with water and dry it in a shaded area.
●
In extremely soiled cases, using a neutral detergent is recommended.
Put on rubber gloves when using a neutral detergent.
●
After washing the filter with water, make sure that it is completely dry
before reinstalling. Otherwise electric shock or malfunctions may occur.
●
Do not clean the filter with a vacuum cleaner or air duster. The filter is
soft and may be damaged.
3
Reinstall the inner filter
Check that the left
and right claws are
locked onto the unit
Downloaded From projector-manual.com JVC Manuals
All manuals and user guides at all-guides.com
Lift up while pushing the claw
ENGLISH
CAUTION
●
Pull the power plug from the power
outlet.
MEMO
If the filter is damaged or too
dirty to be cleaned
●
Replace with a new filter. A dirty filter
will dirty the internal parts of the unit
and cause shadows on the video
image.
●
To purchase a new filter or when it
is dirty in the internal parts, consult
your authorized dealer.
■
Inner Filter Part No.:
Replacement Filter:
the appearance is black
PB006560999 (Inner Filter)
51
Publicidad
