34 OPERATION
Check the Lint Filter Before
Every Load
Always make sure the lint filter is clean before
starting a new load; a clogged lint filter will increase
drying time. To clean, pull the lint filter straight up and
roll any lint off the filter with your fingers. Push the lint
filter firmly back into place. See Regular Cleaning
for more information.
Always ensure the lint filter is properly installed
before running the dryer. Running the dryer with a
loose or missing lint filter will damage the dryer and
articles in the dryer.
Sorting Laundry
Fabric Care Labels
Many articles of clothing include a fabric care label.
Using the chart below, adjust the cycle and option
selections to care for your clothing according to the
manufacturer's recommendations.
Tumble dry
Dry
Normal
Permanent
Press/ wrinkle
resistant
Heat setting
High
Medium
Grouping Similar Items
For best results, sort clothes into loads that can be
dried with the same drying cycle.
Different fabrics have different care requirements,
and some fabrics will dry more quickly than others.
Loading the Dryer
Lint Filter
NOTE
Loading Tips
• Combine large and small items in the same load.
• Damp clothes will expand as they dry. Do not
• Close zippers, hooks, and drawstrings to prevent
Gentle/delicate
Do not tumble
dry
Do not dry (used
with do not wash)
Low
No heat/air
WARNING
To reduce the risk of fire, explosion, electric
shock, injury to persons, and death when
using this appliance, follow basic precautions,
including the following:
• Check all pockets to make sure that they are
empty. Items such as clips, pens, coins, and
keys can damage both the dryer and your
clothes. Flammable objects such as lighters or
matches could ignite, causing a fire.
• Never dry clothes that have been exposed to
oil, gasoline, or other flammable substances.
Washing clothes will not completely remove oil
residues.
overload the dryer; clothes require room to tumble
and dry properly.
these items from snagging or tangling on other
clothes.