Klarstein Airflex 360 Manual De Instrucciones página 12

Operation
Touch screen control technic has been used in this unit, all of unit' s function can be operated by touch the
display window signs slightly. NOTE: When plug in, the machine shows proper insert on the condition that all
LED lights turn on for 2 seconds and BIBI sounds; then, all LED lights turn off and leave it on Standby; besides
the STAND-BY, no button is workable.
Standby Mode
Under standby state, no button is workable but STAND-BY; The machine starts to work by press STAND-BY,
which shows the the initial wind mode as "Normal" and wind speed stays on "Low", having accordingly LED
light show; without timer and swing function.
On the other hand, under standby state, when plug in for the first time, the body sensor function is available;
the working instructions like wind speed mode and oscillation for the last time will all be conserved on the
condition that the power is on and the machine starts for at least for the second time. (Timing hours will not
be conserved under sleeping mode)
Speed
While working , press this button for LOW, MIDDLE and HIGH speed selection. The indicators show on the
display accordingly.
Timer
There is no timer and related display show under the initial conditions. Press the TIMER button, you can set the
running time for this fan, Time setting as: 1H- 2H- 4H- 8H. When setting, the indicator and the figure shows
on the display.
Horizontal Oscillation / Body Sensor
• Press this button for horizontal oscillation selection, with the following set rules: 0 represents no horizontal
oscillation and 60° 90° 180° 360°show accordingly horizontal oscillation angle, The indicators show on the
display accordingl. Press this button for 2.5 seconds to start infrared body sensor function, with two "BI"
sounds.
• Infrared body sensor function: 360° horizontal oscillation once starts, to figure out the suitable angle for
people stand and swing according to this angle for the following work; on the other hand, the machine
would restart to search angle if the human signal is changed.
Vertical Oscillation
To set the vertical angle by pressing this button; Press once to start the 90° vertical oscillation and stop it for
on the second time.
12