Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n)
Overall length
Net weight
Safety class
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
For public low-voltage distribution
systems of between 220 V and 250 V
Only for model GA7062 / GA9062
Switching operations of electric apparatus cause volt-
age fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than 0.25 Ohms it can be pre-
sumed that there will be no negative effects. The mains
socket used for this device must be protected with a
fuse or protective circuit breaker having slow tripping
characteristics.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model GA7062
Sound pressure level (L
pA
Sound power level (L
) : 102 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model GA7062R
Sound pressure level (L
pA
Sound power level (L
) : 102 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model GA9062
Sound pressure level (L
pA
Sound power level (L
) : 102 dB (A)
WA
Uncertainty (K) : 3dB(A)
All manuals and user guides at all-guides.com
) : 91 dB(A)
) : 91 dB(A)
) : 91 dB(A)
GA7062
GA7062R
180mm
7.2mm
M14 or M16 or 5/8" (country specific)
-1
8,500min
5.4kg
5.5kg
Model GA9062R
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3dB(A)
WARNING:
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model GA7062
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: surface grinding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding with normal side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model GA7062R
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: surface grinding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding with normal side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model GA9062
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: surface grinding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
5 ENGLISH
GA9062
GA9062R
230mm
6.5mm
-1
6,600min
450mm
5.6kg
/II
) : 91 dB(A)
pA
) : 102 dB (A)
WA
2
) : 7.5 m/s
h, AG
2
2
) : 7.5 m/s
h, AG
2
2
) : 2.5 m/s
h, DS
2
2
) : 2.5 m/s
h, DS
2
2
) : 7.5 m/s
h, AG
2
2
) : 7.5 m/s
h, AG
2
2
) : 2.5 m/s
h, DS
2
2
) : 2.5 m/s
h, DS
2
2
) : 6.5 m/s
h, AG
2
2
) : 6.0 m/s
h, AG
2
5.7kg
Publicidad
