Publicidad
Idiomas disponibles
Idiomas disponibles
Operating this unit
2
Press a to turn scan play on.
SCAN appears in the display. The first 10 sec-
onds of each track is played.
3
When you find the desired track press
b to turn scan play off.
# If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.
# After scanning of a CD is finished, normal
playback of the tracks will begin again.
Pausing disc playback
Pause lets you temporarily stop playback of
the disc.
1
Press FUNCTION to select PAUSE.
2
Press a or b to turn pause on or off.
# You can also turn pause on or off by pressing
PAUSE.
# To return to the normal display, press
BAND.
Audio Adjustments
Using balance adjustment
Fader/balance setting creates an ideal listen-
ing environment in all occupied seats.
1
Press AUDIO to select FAD.
2
Press a or b to adjust front/rear speak-
er balance.
FAD F15 to FAD R15 is displayed.
# FAD 0 is the proper setting when only two
speakers are used.
3
Press c or d to adjust left/right speaker
balance.
BAL L15 to BAL R15 is displayed.
# To return to the normal display, press BAND.
Using the equalizer
There are six stored equalizer settings such as
DYNAMIC, VOCAL, NATURAL, CUSTOM,
FLAT and POWERFUL that can easily be re-
called at any time.
! CUSTOM is an adjusted equalizer curve
that you create.
! When FLAT is selected no supplement or
correction is made to the sound.
% Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol-
lowing equalizers:
DYNAMIC—VOCAL—NATURAL—CUSTOM
—FLAT—POWERFUL
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in CUSTOM.
Adjusting bass/mid/treble
You can adjust the bass/mid/treble level.
1
Press AUDIO to select BASS/MID/
TREBLE.
2
Press a or b to adjust the level.
+6 to –6 is displayed as the level is increased
or decreased.
# To return to the normal display, press BAND.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Press AUDIO to select LOUD.
2
Press a or b to turn loudness on or off.
# You can also turn loudness on or off by press-
ing and holding EQ.
3
Press c or d to select a desired level.
LOW (low)—HI (high)
# To return to the normal display, press BAND.
Section
02
7
En
Publicidad
