Chapin 97402E Instrucciones De Uso página 3

Chapin Spot Sprayer Operator's Manual - English
OPERATION
The pumping system draws solution from the tank, through the strainer and to the pump.
The pump forces the solution under pressure to the spray wand.
The pump has a pressure switch which will shut the pump off when it reaches 60 PSI.
Regularly inspect the suction supply screen on the inside of the tank. Flush with water to
clear any accumulated debris.
AFTER SPRAYING
After use, fill the sprayer part way with water. Start the sprayer and allow clear water to be
pumped through the plumbing system and out through the spray wand.
Refill the tank about half full with plain water and use a chemical neutralizer and repeat
cleaning instructions. Flush the entire sprayer with the neutralizing agent. Follow the
chemical manufacturer's disposal instructions of all wash or rinsing water.
WINTER STORAGE
Drain all water and chemical out of sprayer, paying special attention to pump and valves.
These items are especially prone to damage from chemicals and freezing weather.
The sprayer should be winterized before storage by pumping a solution of RV antifreeze
through the entire plumbing. Proper care and maintenance will prolong the life of the
sprayer.
2E