Philips TT2039 Manual De Instrucciones página 24

Guarantee and support
Troubleshooting
4 Undo the screws that connect the inner body of the appliance to the
front panel of the housing and separate the inner body from the front
panel.
5 Turn over the inner body. Then detach the cover of the inner body with
the control panel from the inner body.
6 Lift the printed-circuit board out of the inner body, turn it over and cut
the wires that connect the battery to the power unit.
If you need information or support, please visit www.philips.com/support or
read the separate worldwide guarantee leaflet.
This chapter summarizes the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, visit www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Center in your country.
English
15