Riding Instructions; Running The Engine In; Starting The Engine From Cold; Starting The Engine When Warm - SHERCO XY 125 Manual De Propietario

Running the engine in

Starting the engine from cold

Starting the engine when warm

46 46

Riding instructions

The XY125 4-stroke's engine has been constructed
with an absolute precision so that the parts have
correct tolerances and surfaces.
Nevertheless, SHERCO recommends running the
engine gently, without forcing it, for the fi rst 1,000
kilometres.
To start the engine from cold, perform the following
A
steps:
- Switch on the ignition.
- Make sure the gear lever is in Neutral position (N).
- Turn on the choke
- Turn the fuel tap to the ON position.
- Start the engine (either electrically or mechanically).
- Turn off the choke (after a maximum of 1 km).
WARNING
Avoid running with the choke ON.
After covering a distance of approximately 1 km,
turn it OFF.
To start the engine when warm, perform the fo-
A
llowing steps:
- Switch on the ignition.
- Make sure the gear lever is in Neutral position (N).
- Check that the choke
- Turn the fuel tap to the ON position.
- Start the engine.
TIP
A
(Choke chapter).
A
is OFF (Choke chapter).