Descargar Imprimir esta página

Dacor DRF48 Serie Instrucciones De Instalación página 28

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation instructions
WARNING
Be careful that electrical component box is not damaged when installing.
3. Installation preparation
Unpack installation materials and accessories.
See the Installation preparation section on Installation Requirement chapter.
4. Attaching the anti-tip-bracket
WARNING
To keep the unit from tipping forward, an anti-tip bracket must be installed. Before
attaching the bracket, ensure that no electrical wiring or plumbing is in the area where the
screws will penetrate. Two such brackets per appliance are required.
CAUTION
Always wear safety glasses and other necessary protective devices or apparel when
installing or working with anchors.
Dacor does not recommend that you anchor the anti-tip bracket in light-weight masonry
(e.g., block, brick) or in new, uncured concrete.
Make sure the wall or the cabinet that the brackets are studded in has enough strength
to withstand the safety load. If you have to use the spacer, make sure that the spacer is
studded on a rear wall that is strong enough to withstand the safety load.
28
English
Dacor_T-TYPE_BRF9000C_IM_DA68-03621K-01_EN (A5).indd 28
OK
OK
OK (Recommended)
2023-06-01
11:05:47

Publicidad

loading