Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Installing the oven
•
The kitchen area should be dry and aired and equipped with efficient ventillation.
When installing the oven, easy access to all control elements should be ensured.
•
This is a Y–type design built–in oven, which means that its back wall and one
side wall can be placed next to a high piece of furniture or a wall. Coating or
veneer used on fitted furniture must be applied with a heat–resistant adhesive
(100°C). This prevents surface deformation or detachment of the coating.
•
Hoods should be installed according to the manufacturer's instructions.
•
Make an opening with the dimensions given in the diagram for the oven to be
fitted.
•
Make sure the mains plug is disconnected and then connect the oven to the
mains supply.
•
Insert the oven completely into the opening without allowing the four screws in
the places shown in the diagram to fall out.
6 0 0
5 6 0
46
4 0
5 6 0
5 6 0
5 6 0
Publicidad
