Publicidad
Idiomas disponibles
Idiomas disponibles
Electrical connection
Warning!
All electrical work should be carried out
by a suitably qualified and authorised
electrician. No alterations or wilful chang-
es in the electricity supply should be car-
ried out.
The oven is manufactured to work with
a one-phase alternating current (230V
1N~50Hz) and is equipped with a 3 x 1,5
mm2 connection lead.
The electricity supply for the oven must
have a safety switch which enables the
power to be cut off in case of emergency.
The distance between the working con-
tacts of the safety switch must be at least
3 mm.
Before connecting the oven to the power
supply it is important to read the informa-
tion on the data plate and the connection
diagram.
Caution! The installer is obliged to pro-
vide the user with "appliance electrical
connection certificate" (enclosed with the
warranty card).
Connection diagram
Caution! Voltage of heating elements
230V.
Caution! In the event of any connection
the safety wire must be connected to the
PE terminal.
Live L: BN - brown
Neutral N: BU - blue
Earth PE: GNYE -green/yellow
L
Power circuit should be protected with
a 16A fuse.
Recommended type of connection lead:
H05VV-F, 3 x 1,5mm
Important!
If the fixed power supply cable is dam-
aged, it should be replaced at the man-
ufacturer or at an authorized servicing
outlet, or by a qualified person to avoid
danger.
N
.
2
47
Publicidad
