Orbegozo SV 1600 Manual De Instrucciones página 12

SV 1600
STEAM IRONING
A high temperature (cotton, flax) is needed. You can adjust the amount of steam to the steam knob
(4).
No steam
Small amount of steam
Large amount of steam
Impulse steam
Turn the button (5) on the command pulse steam.
•
For steam boost then press the button (5).
•
VERTICAL STEAM
• You can use the steam function vertically.
• Note: To prevent the escape of excess water from the soleplate, operate the steam boost
button no more than 5 seconds without interruption.
• Warning: steam is hot. Danger of burns!
• When ironing at low temperatures, take care to reduce the amount of steam or iron without
steam. Selecting too low temperatures is normal to catch water from the soleplate.
FILLING THE WATER TANK
• Remove the power plug before filling water.
• Adjust governor of the amount of steam (4) to "
filler opening (6) and carefully pour water. Fill the water tank only to the MAX mark.
SPRAYER
Turn the button (5) on the symbol spray.
•
To moisten a space, press the spray button (5).
•
CLEANING AND STORAGE
Always disconnect the appliance before cleaning and let it get cold.
•
Clean the outside with a dry cloth.
•
Clean the soleplate with a damp cloth.
•
After use, place the regulator always the amount of steam to the position "
•
the water to avoid spilling of the contents of the tank.
" (no steam) position. Open the cover of the
" and empty
12