Parkside PAMFW 12 D4 Traduccion Del Manual De Instrucciones Originale página 54

Dust/chip extraction
Materials containing asbestos may not be
processed . Asbestos is a known carcinogen .
WARNING! RISK OF FIRE!
■ When working with electrical appliances that
can be connected to a vacuum cleaner via a
vacuum cleaner adapter, there is a risk of fire!
In unfavourable conditions, e .g . when sparks
are flying while sanding metal or metal resi-
dues in wood, wood dust in the bag of the
vacuum cleaner can spontaneously ignite .
This is a particular risk if the wood dust is
mixed with paint residues or other chemicals
and the workpiece has become hot after
being worked for a long time . Therefore,
avoid overheating of the material being
sanded as well as the appliance . Always
empty the vacuum cleaner's dust bag before
taking work breaks .
■ Always use dust extraction .
■ Ensure that your workplace is adequately
ventilated .
■ Observe the regulations applicable in your
country regarding the materials to be worked .
Connecting a dust extraction unit
♦ Place the dust extraction unit
appliance and fix it into place on the appliance
with the screw .
♦ Fit the angle adapter
unit .
The angle adapter
180° .
■ 50 │ GB │ MT
under the
onto the dust extraction
can be turned by up to
Select a tool
NOTE
► The universal fitting without-tool-change is
suitable for standard accessories .
HCS plunge saw blade 32 mm
Materials
Wood, plastic, gypsum (plaster) and other soft
materials
Application
–
separation and plunge saw cuts
–
sawing close to edges, even in hard to reach
areas
Example sawing of recesses in lightweight walls .
Diamond saw blade
Materials
Tile adhesives, tile joints
Application
–
removal of material residues, such as tile
adhesive, when replacing damaged tiles
–
milling of grout on wall and floor tiles .
Scraper
PAMFW 12 D4