Garland CRUMMER 1220 QGW Manual De Instrucciones página 33

Idiomas disponibles

5. MACHINE DESCRIPTION

5.1. CONDITIONS OF USE

The chipper is only designed to shred pieces of wood with a maximum diameter of 10 cm. It is prohibited

to shred any other material (for example metal, stones, plastics and any other material). If you want to shred

roots, remove the sand, mud or other residues before shredding. Any other use of the shredder not described

here, annuls the warranty responsibility of the manufacturer. Do not use this machine for any other purpose not

intended. The use of this machine for other than the designated operations may result in dangerous situations.

Utilice esta máquina en el exterior, en ambientes secos y temperaturas entre 5ºC y 45ºC.

Remember that the machine operator is responsible for the dangers and accidents caused to other people or

things. The manufacturer shall not be in any case responsible for damages caused by improper or incorrect use

of this machine.

5.2. DETAILED PRODUCT DESCRIPTION

1. I nlet hopper

2. Carry handle

3. Power ON/OFF

4. Outlet tube

5. Transport wheels

6. Base of support

7. Belt tensioner crank

8. Escape

9. Air filter

10. Fuel tank

11. Crankcase oil plug

12. Pull starter

13. Battery compartment

Images and drawings in this manual are approximate and may not correspond with the actual product.

33/148

English