Safety Notes - brennenstuhl ML DN 2405 Manual De Instrucciones

Operating Instructions
D
Mobile SMD-LED Light
Please note: Please read these instructions carefully prior to mounting the light and store them in
a safe location afterwards!
SPEcIfIcaTIONS
Nominal voltage:
Output:
Type of protection:
Protection clas:
Cable:
Protective cover dimensions: 180 x 143 x 4 mm
Maximum projected area:
Overall dimensions L/B/H:
Weight:
The heavy-duty LED light is suitable for indoor and outdoor lighting applications. This luminaire
is only intended for normal use, must NOT be used for rough service, for example on construction
sites. The mobile SMD-LED light is wired ready for connection and comes with a connecting cable
and a safety plug.
Note: The light is continuously horizontally adjustable within its pivoting range and can be locked
in position using the locking screws.

SafETy NOTES

1. Do not use this light without properly attached gaskets!
2. LED lights are extremely bright! Avoid looking straight into an LED light beam, as doing so
could result in irreversible eye damage.
3. Damaged protective covers must be replaced with an original Brennenstuhl protective cover
before the light can be used again.
4. If the mains supply cable of the device is damaged it must be replaced by a qualified technician
in order to avoid risks.
5. Make sure the light is attached firmly and securely. Make sure the cable is not crimped or
otherwise damaged.
4
220 -240 V~ / 50 Hz
24 LED x 0.5 W
IP 44
I
2 m H05RN-F3G1.0
200 cm²
205 x 230 x 315 mm
2200 g