brennenstuhl DT DE Serie Instrucciones De Uso página 20

Instructions manual
Fig. 1
2. Press OK key to confirm it, PROG 1 ON stop
flashing and Weekday box starts flashing.
3. With the ▲ (UP) or M (DOWN) key, select the
weekday on which program 1 should be switched
on and off. The day display then goes through all
15 possible programs e.g. Mo-SU in succession,
then repeats itself. In this example, you would
press OK as soon as MO appeared in the display.
4. Now the Hour box should flash. With the ▲ (UP)
or M (DOWN) key, set this box to 7, then press
the OK key.
5. Now the Minute box should flash. With the ▲
(UP) or M (DOWN) key, set this box to 35, then
press the OK key.
6. To conclude the setting of program 1, press the
OK key. The display will now resemble that
shown in Fig. 2.
20