brennenstuhl DT DE Serie Instrucciones De Uso página 25

Manual on/off, Auto on/off setting
The timer can be switched on or off at any time by
pressing MODE and OK key without affecting any
programs set before. To switch the timer on, off or
auto programming, press the MODE key and press
the OK key to confirm it.
1. Set AUTO OFF status (Fig. 7)
Socket is currently off -> time programs are
activated.
Press MODE key one time, AUTO OFF flash, then
press the OK key to confirm it.
Fig. 7
2. Set ON status (Fig. 8)
Socket is permanently on -> time programs are
deactivated.
Press MODE key second times, ON flash, then
press the OK key to confirm it.
Instructions manual
25