brennenstuhl DT DE Serie Instrucciones De Uso página 21

Fig. 2
7. To switch off program 1 at 16:25, press the ▲
(UP) or M (DOWN) key until PROG 1 OFF
appears in the display, then carry out the same
steps as for program 1 ON.
8. If you wish to set a number of programs, press
the ▲ (UP) or M (DOWN) key until PROG 2 ON is
displayed. Carry out the steps described above
to set all the other programs.
9. During the programs setting, press the ▲ (UP)
and M (DOWN) key simultaneously, the programs
data input are cancelled and the LCD displays —
:— with full week days. Pressing the ▲ (UP) and
M (DOWN) key simultaneity again, the data can-
celled can be recalled.
Countdown timing function
By means of the Countdown function, the timer can
be switched on or off for any period from 1 second
to 23 hours, 59 minutes and 59 seconds. To set the
Countdown time proceed as follows.
Instructions manual
21