Keysight Technologies U8030A Serie Manual De Instrucciones página 44

2 Operation and Features
Track Mode Operation
When the track mode is enabled, the voltage settings of Output 1 and Output 2
will mirror each other. The following steps show you how to track the voltage of
the selected output.
1 Select an output channel.
2 Set the desired voltage setting for the selected output channel.
3 Enable the track mode.
4 Disable the track mode.
44
– Press [1] to select Output 1, or
– Press [2] to select Output 2.
– The corresponding annunciator (OUT1 or OUT2) turns on.
– Repeat step 3 to
– Press and hold the [Track] button. The display shows HOLd until the track
mode is enabled.
– The TRACK annunciator turns on.
– The voltage setting of the non-selected output is set to the same voltage
setting of the selected output.
– Press the [Track] button again. The TRACK annunciator turns off.
– The track mode is disabled.
step 7 from the "Constant Voltage Operation"
Keysight U8030A Series User's Guide
on page 38.