Descargar Imprimir esta página

Keysight Technologies U8030A Serie Manual De Instrucciones página 51

Publicidad

Idiomas disponibles

Idiomas disponibles

Program the memory output time interval
1 Edit the memory output time interval.
To cancel this operation, allow the unit to idle for five seconds.
NOTE
Keysight U8030A Series User's Guide
– Press the [t] button.
– The t annunciator turns on.
– By default, the M1 annunciator turns on indicating t
adjustment.
– To select t
or t
2
or M3 annunciator turns on.
– The display shows the time interval in seconds, with the integral part on
line 1 and the fractional part on line 2.
– Press the [t] button to change the cursor position. Turn the knob to adjust
the value. The time interval can be set with a resolution up to 10 ms.
– You can set the time interval within the range of 0 s to 9999.99 s.
– Press and hold the [t] button to save the setting.
– The display shows dOnE.
, press the [Memory] button until the corresponding M2
3
Operation and Features
is being selected for
1
2
51

Publicidad

loading