Keysight Technologies U8030A Serie Manual De Instrucciones página 47

Memory Operations
Up to three operating states can be stored in the non-volatile storage locations.
The storage feature remembers the voltage and current limit value settings; OVP
and OCP on or off states; and OVP and OCP trip levels. The following steps show
you how to store and recall an operating state.
Storing an operating state
1 Store the power supply current operating state.
2 Turn the knob to choose the memory location for storing the operation
3 Press the [Memory] button again to save the current operating state in the
To cancel this operation, allow the unit to idle for five seconds.
NOTE
Keysight U8030A Series User's Guide
– Press the [Memory] button.
– The M1 annunciator will blink.
state.
– The M1, M2, and M3 annunciators will blink in a round-robin manner.
chosen memory location.
– The display will show dOnE.
– The M1, M2, and M3 annunciators turn off.
Operation and Features 2
47