Keysight Technologies U8030A Serie Manual De Instrucciones página 50

2 Operation and Features
Enable the memory output loop operation
1 Enable the memory output loop operation.
2 Cancel the memory output loop operation.
50
– Press and hold the [Memory Output] button until the t annunciator starts
to blink. (The t annunciator turns on first before it starts to blink).
– All the M1, M2, and M3 annunciators turn on.
– The operating state from M1 memory location is recalled immediately.
– The M1 annunciator blinks. The M2 and M3 annunciators are steadily on.
– After waiting for t
recalled.
– The M2 annunciator blinks. The M1 and M3 annunciators are steadily on.
– After waiting for t
recalled.
– The M3 annunciator blinks. The M1 and M2 annunciators are steadily on.
– After waiting for t
recalled.
– The process is repeated infinitely until canceled.
– Pressing the [Memory Output] button during the memory output loop
operation will terminate the operation immediately.
– All outputs will be disabled.
– The OFF annunciator turns on.
, the operating state from M2 memory location is
1
, the operating state from M3 memory location is
2
, the operating state from M1 memory location is
3
Keysight U8030A Series User's Guide