Amana ACD12JE-E Manual De Uso Y Cuidado página 11

NOTE: Remote control may differ in appearance.
ON/OFF
MODE
SPEED
TIMER
TEMP/TIME
TEMP/TIME
UV LIGHT
NOTE: One CR2025 battery (included) powers the remote
control. Replace battery after 6 months of use, or when the
remote control starts to lose power.
Power
Press ON/OFF to turn on the air conditioner.
ON/OFF
MODE
Mode
Press MODE to choose Fan, Cool, Energy Saver or Dehum.
SPEED
TIMER
Speed
TEMP/TIME
Press SPEED to choose High, Med or Low.
TEMP/TIME
All manuals and user guides at all-guides.com
Using the Remote Control *
B R A I L L E
For Sight Impaired
*
Dots are Braille text for
sight Impaired.
ON/OFF
MODE
ON/OFF
SPEED
MODE
TIMER
SPEED
TEMP/TIME
TIMER
TEMP/TIME
Temperature
Press the TEMP/TIME up arrow button to raise the
■
temperature. Each time you press or hold the TEMP/TIME
up arrow button, the temperature will go up 2ºF (1ºC) until it
reaches 86°F (30°C).
Press the TEMP/TIME down arrow button to lower the
■
temperature. Each time you press or hold the TEMP/TIME
down arrow button, the temperature will go down 2ºF (1ºC)
until it reaches 61°F (16°C).
Timer
To set the Timer for a 1-hour to 24-hour delay before the
air conditioner is turned off (the air conditioner must be
On):
1. Press TIMER. Timer OFF indicator light on the air conditioner
control panel will flash.
2. Press the TEMP/TIME up or down arrow button to change the
delay time from 1 hour to 24 hours.
3. After 5 seconds, Timer OFF indicator light on the air
conditioner control panel will remain on.
To set Timer to turn on the air conditioner while keeping
previous settings:
1. Turn off the air conditioner.
2. Press TIMER. Timer On indicator light on the air conditioner
control panel will flash.
3. Press the TEMP/TIME up or down arrow button to change the
delay time from 1 hour to 24 hours.
4. After 5 seconds, Timer On indicator light on the air
conditioner control panel will remain on.
To set Timer to turn on the air conditioner and change the
previous settings:
1. Turn on the air conditioner.
2. Adjust the mode to Fan, Cool, Energy Saver or Dehum.
3. For Fan, Cool or Energy Saver mode, adjust the fan speed to
High, Med or Low.
ON/OFF
MODE
ON/OFF
SPEED
MODE
TIMER
SPEED
TEMP/TIME
TIMER
TEMP/TIME
TEMP/TIME
TEMP/TIME
ON/OFF
MODE
SPEED
TIMER
TEMP/TIME
TEMP/TIME
11