Publicidad
Idiomas disponibles
Idiomas disponibles
NOTES:
Handle the air conditioner gently.
■
Be sure your air conditioner does not fall out of the opening
■
during installation or removal.
The place where the power cord exits the air conditioner should
■
be no more than 4 ft (122 cm) from a grounded outlet.
Do not block the louvers in the front panel.
■
Do not block the louvers on the outside of the air conditioner.
■
1. Center the air conditioner in the window. Lower the window
sash behind the top channel to hold the cabinet in place
NOTE: Your model may differ from the one shown.
A
A. Side curtain against window channel
B. Window sash behind top channel
C. Bottom channel in behind windowsill
2.
Loosen the screw on the right-hand side of the air conditioner
cabinet near the bottom.
All manuals and user guides at all-guides.com
Position Air Conditioner
B
C
3.
Slide the side bracket over the screw.
4. Tighten the screw. The side bracket should be resting on the
windowsill.
5.
Use ¹⁄₈" drill bit to drill a starter hole through the holes in the
side bracket and windowsill.
6.
Using two ³¹⁄₃₂" screws, attach the side bracket to the
windowsill.
7.
Repeat for side bracket installation on the left-hand side of
the air conditioner.
Attach Side Curtains to Window
1. Pull the left-hand curtain out until it fits into the window
channel.
2. Use a ¹⁄₈" drill bit to drill a starter hole through the top hole in
the side curtain and into the window sash.
3.
Insert one of the ³¹⁄₃₂" screws through the top hole of the
lefthand curtain and into the window sash.
4. Repeat for the right-hand curtain.
7
Publicidad
