Publicidad
Idiomas disponibles
Idiomas disponibles
Thank you for purchasing a DOLMAR product!
Congratulations on choosing a DOLMAR Power Cut cutoff saw!
We are confident that you will be satisfied with this modern piece
of equipment. DOLMAR GmbH of Hamburg, Germany is the
world's oldest manufacturer of gasoline-powered chainsaws - we
got our start in 1927 - giving us very extensive experience with
power hand tools. Like our chain saws, the DOLMAR Power Cuts
feature specially designed high-performance engines with
outstanding power-to-weight ratios, for heavy-duty yet lightweight
tools.
Other advantages of the DOLMAR Power Cuts:
• Sturdy construction and high reliability.
• Maintenance-free electronic ignition, hermetically sealed to
protect against dust and moisture.
• Vibration damping with the DOLMAR 2-mass system (D2M)
for tireless working even when guiding the Power Cut by
hand.
• Five-stage air-filter system for reliable working even under
very dusty conditions.
• Two options for mounting the cutter attachment: Either
centrally, for good balance when guiding the unit manually,
or on the side, for flush cuts along walls or curbsides or
horizontally directly above the ground.
• Extensive range of resin-bonded and diamond grit cutting
discs, trolley with dust catcher, and systems for supplying
water to the disc.
The following industrial property rights apply:
US 08510690, SE 95027298, SE 95027306, IT 95000653,
IT 95000654, GBM 9412558, GBM 9412559.
We want you to be satisfied with your DOLMAR product.
In order to guarantee the optimal function and performance of
your Power Cut and to ensure your personal safety we would
request you to perform the following:
Read this Instruction and Safety Manual carefully before
putting the Power Cut into operation for the first time,
and strictly observe the safety regulations! Failure to
observe these precautions can lead to severe injury or
death!
WARNING!
Some dust created by power sanding sawing,
grinding, drilling, and other construction activities
contains chemicals known (to the State of California)
to cause cancer, birth defects or other reproductive
harm.
Some examples of these chemicals are:
•
lead from lead-based paints,
•
crystalline silica from bricks and cement and
other masonry products, and
•
arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work.
To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
The Emissions Compliance Period referred to on the emission
Compliance label indicates the number of operating hours for
which the engine has been shown to meet federal emissions
requirements.
Category C= 50 hours, B= 125 hours, and A= 300 hours.
Table of contents
Packing ................................................................................ 3
Delivery inventory .............................................................. 4
Symbols ............................................................................... 4
SAFETY PRECAUTIONS
Intended use ................................................................... 5
General precautions ........................................................ 5
Protective equipment .................................................. 5-6
Fuels / Refuelling ............................................................ 6
Putting into operation ...................................................... 6
Cutting discs .................................................................... 7
Kickback and lock-in ....................................................... 8
Working behavior / Method of working ........................... 8
Cutting metal ................................................................... 9
Cutting masonry and concrete .................................. 9-10
Transport and storage .................................................. 10
Maintenance .................................................................. 11
First aid ......................................................................... 11
Technical data ................................................................... 12
Denomination of components ......................................... 12
PUTTING INTO OPERATION
Mounting the cutting disc .............................................. 13
Tightening the V-belt / Checking V-belt tension ........... 14
Installing the pressure water system ...................... 14-15
Fuels / Refuelling .................................................... 15-16
Starting the engine ........................................................ 17
Cold-starting .................................................................. 17
Warm-starting ................................................................ 18
Stop engine ................................................................... 18
Adjusting the carburetor ................................................. 19
MAINTENANCE
Changing the V-belt ...................................................... 20
Cleaning the protection hood ........................................ 21
Cleaning / changing the air filter ............................. 21-22
Replacing the spark plug .............................................. 22
Replacing the suction head .......................................... 23
Replacing the starter cable ..................................... 23-24
Replacing the return spring .......................................... 24
Instructions for periodic maintenance ........................... 28
Cutting attachment in central / side position .......... 25-26
Repositioning the cutting attachment ..................... 25-26
Replacing/cleaning the spark arrester screen .............. 26
SPECIAL ACCESSORIES
Diamond cutting discs, trolley, water tank
and pressure water system ................................................ 27
Service, spare parts and guarantee ......................... 28-29
Troubleshooting ............................................................... 29
Extract from spare parts list ............................................ 30
Accessories ................................................................... 30
Service stations ................................................................ 92
Packing
Your DOLMAR Power Cut is packed in a cardboard box to
prevent shipping damage.
Cardboard is a basic raw material and is consequently reuse-
able or suitable for recycling (waste paper recycling).
RE Y
Page
3
Publicidad
