Qilive Q.6822 Manual De Instrucciones página 13

8. Install the lower hinge on the left side of the cabinet. Install the adjustable foot at
the right.
9. Remove the screw that secures the door stop from the bottom right of the freezer
compartment door, then remove the door stop and install to the bottom left side.
10. Install the freezer compartment door.
11. Move the door bushing from the top right side of the freezer door to the top left
side of the door. And move the left hole cover to the right side.
Door bushing
12. Secure the upper hinge to the top left side of the cabinet with the three screws you
removed previously. Before you tighten the upper hinge screws, make sure that
the top of the door is level with the cabinet and that the rubber gasket makes a
good seal.
Note: Ensure the rubber gaskets are
making a good seal with the cabinet
all the way around the doors before
tightening the hinge screws.
Pin shaft
Washer
Nut
Adjustable foot
Lower hinge
Screws
Freezer door
Hinge cover
Upper hinge
13
Adjustable
foot
Door stop
Hole cover
Screws
Hole cover
EN