Descargar Imprimir esta página

Qilive Q.6822 Manual De Instrucciones página 15

Congelador table top

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
ice scraper to scrape them off and then take them out.
2.
After defrosting, clean the refrigerator/freezer inside, and switch on the power
supply.
7.3. SAFETY-CHECK AFTER MAINTENANCE
Is the power cord broken or damaged?
Is the power plug firmly inserted into the socket?
Is the power plug abnormally overheated?
Note: Electric shock and fire accident may be caused in case the power cord
and plug is damaged or stained by dust. If any abnormality, please unplug the
power plug and get in contact with the vendor.
How to disassemble the parts
Shelf: Hold one end of the shelf, and lift it up while pulling it outward.
Flip cover: Keep the flip cover in the vertical direction, align it with the rotating shaft
opening on the right side, and pull it outward to remove it;
During use of the refrigerator, do not close the door when the flip cover is
opened, to avoid damaging the refrigerator door!
7.4. MOVING THE REFRIGERATOR/FREEZER
Location
Do not place your refrigerator/freezer near a heat source, e.g. cooker, boiler or radiator.
Avoid it from direct sunlight in out-buildings or sun lounges.
Leveling
Make sure to level your refrigerator/freezer using the front leveling feet. If not level, the
refrigerator/freezer door gasket sealing performance will be affected, or even it may
lead to the operating failure of your refrigerator/freezer.
After locating the refrigerator/freezer in position, wait for 4 hours before using it, so as
to allow the refrigerant to settle.
Installation
Do not cover or block the vents or grilles of your appliance.
7.5. VACATION TIME
If the appliance will not be used for long periods, turn it off first, and then unplug it
from the wall outlet.
Take out all foods.
Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the
door ajar: block it open or have the door removed if necessary.
Keep the cleaned appliance in a dry, ventilated place and away from the heat
source, place the appliance smoothly, and do not place heavy objects on top of it.
The unit should not be accessible to child's play.
15
EN

Publicidad

loading