Publicidad
Idiomas disponibles
Idiomas disponibles
2. TECHNICAL SPECIFICATIONS
EN
Power supply
Rated current
Energy consumption
Protection class
Climate class
Total volume
Freezer compartment volume
Freezing capacity
Refrigerant and inject amount
Net weight
3. PRODUCT DESCRIPTION
1.
Thermostat knob
2.
Flip cover
4. INSTALLATION
4.1. INSTALLATION LOCATION
1.
Ventilation condition
The position you select for the refrigerator installation should be well-ventilated and has
less hot air.
Do not locate the refrigerator near a heat source such as cooker, and avoid
it from direct sunlight, thus guaranteeing the refrigeration effect while saving
energy consumption.
Do not locate the refrigerator in a damp place, so as to prevent the refrigerator
from rusting and leaking electricity.
The result of the total space of the room in which the refrigerator is installed being
divided by the refrigerant charge amount of the refrigerator shall not be less than 1m³
(space) / 8g (refrigerant).
Note: The amount of refrigerant charged for the refrigerator can be found on the
nameplate.
2.
Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore, at least
30 mm of free space should be spared at the top side, more than 100 mm on both
sides, and above 50 mm at the back side of the refrigerator.
Dimensions in mm:
W
D
470
509
H
A
845
900
220 - 240 V~, 50 Hz
0.6 A
197 kWh/year
I
N/ST
64 L
64 L
3kg/24h
R600a/31g
25 kg
3.
Freezer drawers
4.
Adjustable feet
B
C(°)
975
125±5
8
E
F
50
100
Publicidad
