Publicidad
Display mode
Mode d'affichage
Modo de
indicación
154
Get user manuals:
See SafeManuals.com
Video output connector
Prise de sortie vidéo
Conector de salida de video
Jog dial
Molette de
défilement
Disco Jog
E
CONNECTING TO A TELEVISION
Recorded images can be viewed on a TV.
Make sure that the power of the TV and the camera are off
before connecting.
1
Connect the cable by inserting it into the video output
connector of the camera and the input connector of the
TV.
2
Turn on the TV.
3
Set the Mode dial to "
select the Display mode.
4
Select a picture with the Jog dial.
When using the remote control
Aim the remote control at the Remote control window on the
camera. Press the +/– buttons to select a picture. Press the
W button for Index-Display. Press the T button for Close-Up
display, and select the section to view with the +/– buttons.
Note:
The LCD monitor turns off automatically when
connected to a TV.
Refer to your TV/VCR instruction manual for
information about displaying video images.
The picture may appear to be off-center on the TV
screen because of the TV adjustment.
Your TV may produce a black frame around the
picture, which may look peculiar when printed to a
video printer.
The use of the optional AC adapter is recommended.
Images shown on screen can be saved to video tape.
" then turn on the power to
Publicidad
