Publicidad
Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet
NAIL SELECTION
● Be sure to use only the genuine HITACHI nails for the
NT65MA2. The use of any other nails can result in tool mal-
function and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
15 Gauge finish nails
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
13-17/32" × 11-31/32" × 3-7/32"
(344 mm × 304 mm × 82 mm)
4.4 lbs. (2.0 kg)
.042 ft
(1.20 ltr/cycle at 6.9 bar)
(1.20 ltr/cycle at 7 kgf/cm
3/8 NPT Thread
WARNING
Dimensions of nails
Min.
100 Nails
3
/cycle at 100 psi
2
)
.095" (2.4mm)
.072" (1.8mm)
English
2
)
Max.
9
Publicidad
