10
PrODUCT OVErVIEw
Control panel Features
Following are instructions for starting and using your new dryer. Please refer to specific sections of this
manual for more detailed information.
wWArNiNG :
To reduce the risk of fire, electric shock, or injury to persons, read this entire manual,
including the important Safety instructions, before operating this dryer.
Operation
Button
POWER ON/OFF BUTTON
- Press to turn the dryer ON. Press again to turn the dryer OFF.
NOTE : Pressing the ON/OFF button during a cycle will cancel that cycle and any
load settings will be lost.
CYCLE SELECTOR kNOB
- Turn this knob to select the desired cycle. Once the desired cycle has been
selected, the standard presets will be shown in the display. On MANUAL DRY
cycles, these settings can be adjusted using the cycle modifier buttons anytime
before starting the cycle.
START/PAUSE BUTTON
- Press and hold this button for about half a second to start the selected cycle. If
the dryer is running, use this button to pause the cycle without losing the current
settings.
NOTE : If you do not press the START/PAUSE button to resume a cycle within 60
minutes, the dryer turns off automatically.
mORE TImE/LESS TImE BUTTONS
- To adjust the drying time, use these buttons with MANUAL DRY, TIME DRY, and
STEAM FRESH™ cycles, as well as the REDUCE STATIC and EASY IRON options. Press
the MORE TIME button to increase the selected manual cycle time by a minute;
press LESS TIME to decrease the cycle time by a minute.
CYCLE mODIFIER BUTTONS
- Use these buttons to modify the default cycle settings for the selected cycle. The
current settings are shown in the display. Press the button for that option to view
and select other settings.
OPTION BUTTONS
- The OPTION buttons allow you to select additional cycle options. Certain buttons
marked with an asterisk also allow you to activate special functions by pressing
and holding the button for 3 seconds.
STEAm FUNCTIONS
- LG's steam technology injects fabrics with a swirling jet of hot steam to refresh
clothes, reduce static, and make ironing easier. Simply select the Steam Fresh™
cycle, or you can add a steam option to selected cycles.
Description