Descargar Imprimir esta página

LG WT7300CW Manual Del Propietário página 22

Ocultar thumbs Ver también para WT7300CW:

Publicidad

Idiomas disponibles

Idiomas disponibles

22 OPERATION
Control Panel
Control Panel Features
Power On/Off Button
1
Press to turn the washer on. Press again to
turn the washer off. Pressing the Power button
during a cycle will cancel that cycle and any load
settings will be lost. The lid (door) will unlock
after a brief pause.
NOTE
• If there is any water remaining in the tub after
the washer shuts off, it will drain following 4
minutes delay. The washer can be restarted any
time before the drain begins. However, once
the water begins to drain, all functions will be
suspended until the water has been completely
drained and the washer shuts off.
Cycle Selector Knob
2
Turn this knob to select the desired cycle.
Once the desired cycle has been selected, the
standard presets will appear in the display. These
settings can be adjusted using the cycle modifier
buttons anytime before starting the cycle.
NOTE
• To protect your clothing, not all settings are
available on all cycle selections.
Start/Pause Button
3
Press this button to start the selected cycle. If the
washer is running, use this button to pause the
cycle without losing the current settings.
NOTE
• If Start/Pause is not pressed within 60 minutes
of selecting a cycle, the washer automatically
turns off and all cycle settings are lost. Any
water remaining in the tub will be drained.
2
1
3
3
Cycle Modifier Buttons
4
Use these buttons to adjust the water
temperature, spin speed and soil level settings
for the selected cycle. The current settings are
shown in the display. Press the button for that
option to select other settings.
Special Cycle and Option Buttons
5
Press these buttons to select special cycles
or additional cycle options. Certain buttons
also allow you to activate special functions
by pressing and holding the button for three
seconds.
Time and Status Display
6
The display shows the settings, estimated time
remaining, options, and status messages for
your washer. When the washer is turned on, the
default settings in the display will illuminate.
6
4
5

Publicidad

loading

Este manual también es adecuado para:

Wt7300c serieWt7300cvWt7250c serie