Publicidad
Idiomas disponibles
Idiomas disponibles
Chapter 2 Installation
2.2.2. Solid measurement
（1）Flange mounting
Like measuring liquid medium, the instrument can be installed on the butt flange of
the container nozzle. Since the reflection surface of the solid is different from that
of the liquid and is not a plane, this problem should be considered during
installation. The emitting surface of the probe should be perpendicular to the
surface of the solid to be measured, and the probe should be able to protrude from
the nozzle.
In the field of measuring solid, if the probe is retracted into the nozzle, the
measured data will jump or "wave drop" will occur in most cases.
In order to solve this problem, a universal flange can be selected, so that as long
as the flange is rotated, it is easy to align the emitting surface of the probe with the
solid reflecting surface to be measured.
Installed on container flange
（2）Threaded pipe installation
When installing with a threaded nipple, the probe must be exposed more than 2cm
from the bottom of the nipple.
- 12 -
Publicidad
