Publicidad
Idiomas disponibles
Idiomas disponibles
Chapter 2 Installation
During the installation of the open-air material pile, the large open-air material pile
needs to be measured by a plurality of meters, the meters can be fixed on the
lifting frame, and the sensor probe should be aligned with the surface of the
medium.
Measurement of open-air material pile-installation on lifting frame
2.2.3. Measuring nozzle extension method
A minimum distance between the probe of the ultrasonic level meter and the
surface of the medium to be measured needs to be maintained, which is
commonly referred to as blind area. However, sometimes the minimum distance
cannot be guaranteed on site, so it is necessary to install an extended nozzle on
the container.
（1）How to extend the nozzle.
The inner wall of the nozzle shall be kept smooth, and the nozzle shall not be
immersed in the medium to prevent the medium from polluting the nozzle or
adhering to the inner wall of the nozzle.
- 14 -
Publicidad
