Publicidad
Idiomas disponibles
Idiomas disponibles
Chapter 4 Menu and operation
Main menu
Press the SET key to enter the main menu, as shown in the following figure:
1.Display unit
2.Com Setting
3.User parameter
4.Factory Param.
5.Calibration
6.Password
7.Self-diagnosis
Display unit
1. Display unit
2. Com Setting
3. User parameter
4. Factory Param.
5. Calibration
6. Password
7. Self-diagnosis
【SET】
▼
Level unit: m
Temp unit:℃
Chapter 4 Menu and operation
In the main menu interface, you can move
the cursor up and down by pressing the INC
key or SHT key to switch the cursor to the
parameter item to be modified, and then
press the SET key to enter. The factory
parameters and calibration settings can only
be entered by entering the correct
password. You can return to the main
interface by pressing the ESC key.
Level units: m, dm, cm, mm, in, ft, yd.
Degree-day: Available in Celsius (℃) and
Fahrenheit (℉).
During operation, press SHT key to select,
press INC key to modify, ESC key to cancel
modification and return to the previous
menu, SET key to confirm modification and
return to the previous menu. (If no special
instructions are given for other interfaces,
the key operation is consistent)
- 23 -
Publicidad
