Publicidad
Idiomas disponibles
Idiomas disponibles
【SET】
▼
Alarm2: None
ON:
00.000 m
OFF:
00.000 m
【SET】
▼
Reset
YES NO
Factory Setting
1.Display unit
2.Com Setting
3.User parameter
4.Factory Param.
5.Calibration
【SET】
▼
Chapter 4 Menu and operation
on alarm value, the power supply alarm
output is turned on, and when it is greater
than the power-off alarm value, the power
supply alarm is turned off. (Note: Alarm is
optional）
Alarm channel 2 is set with reference alarm
channel 1. (Note: Alarm is optional)
When the working parameters of the
instrument are wrong and cannot work
normally, the instrument can be reinitialized
by restoring the factory parameters. Note:
Restoring factory parameters requires on-
site debugging. Please operate carefully!
Enter the factory parameters by entering the
password. Enter the correct password and
press SET. If the password enters the next
interface correctly, the password error will
exit the main interface directly. Factory
parameters must be changed and set by
professionals, and non-professionals should
not move. When instruments are part of
- 27 -
Publicidad
