a) Place the device on a stable and heat-resistant surface.
b) Twist off the tank.
c) Supply tap water or demineralized water. The water tank capacity is
1.7 liters.
d) Adjust the temperature dial in terms of choosing the kind of fabrics that
you want to iron.
Note: If you want to use the steam ironing, we suggest you to adjust the
temperature dial on MAX.
e) Insert the plug in the wall outlet and turn on switch.
Note: During the whole operating time, the iron operating light indicator will
go on and off in erratic intervals, this is normal.
f) To make the steam jet come out, press the steam
If the steam stops coming out, this is probably because there is no more
water in the tank. In order to continue ironing, follow the instructions of the
paragraph "SUPPLYING WATER WHILE OPERATING".
g) Cleaning mode (a large amount of sewage will be discharged from the
steam hole of the soleplate during cleaning, please make relevant
preparations in advance). The machine has intelligent reminder
cleaning mode and active cleaning mode respectively. Smart reminder
cleaning mode refers to the user after continuous use steam ironing
accumulative total of 25 hours, cleaning light normally on remind users
need to clean the machine, the first long pushes a cleaning button for 3
seconds until the flashing, at this time to press the trigger, the machine
into cleaning mode and start from the soleplate hole steam discharge
sewage; Active cleaning mode refers to that when the power switch is
on, long press the cleaning button for 3 seconds until the cleaning light
flashes, and then adjust the thermostat knob on the iron to the cleaning
gear). At this time, press the trigger, the machine enters the cleaning
mode and begins to discharge sewage from the soleplate steam hole.
The cleaning time will last for 1 minute, and the cleaning mode will end
when the cleaning light is off.If you need to exit the cleaning mode,
please press the cleaning button for 3 seconds until the light is off.
.
trigger