8.2
Polarizing set (optional)
1. Place the polarizer on the light exit
croscope. (Fig. 5)
2. Loosen the head fixing knob
the microscope frame. (Fig. 6)
3. Insert the analyzer
③
4. Put back the head into its original position and lock the fixing
knob.
at the base of the mi-
①
and remove the head from
②
into the hole inside the frame. (Fig. 7)
③
Page 12
①
F ig. 5
F
ig. 5
②
F ig. 6
F
ig. 6
F ig. 7
F
ig. 7