Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Always
place
a
chisel
hammer and hold the tool down
to
the
work
before
ing. Damage to the tool or the
retainer
may
result
precaution is not followed.
The
chisel
retainers
designed
for
complete
ty against accidental release of
cutters
or
hammers.
injury,
the
throttle
must
be depressed unless the chisel is held
firmly against the work place. When
tool is not in actual use, the chisel
must be removed. During opera-
WARRANTY
Important: DO NOT RETURN DEFECTIVE PRODUCT OUTSIDE OF ORIGINAL ONE (1) YEAR WARRANTY PERIOD TO
PLACE OF PURCHASE.
WARRANTY POLICY:
from the date of original purchase. We will replace, at our option, any part which proves to be defective in material or workman-
ship. Repairs or replacements are warranted as described above for the duration of the original warranty period. In the unlikely
event a replacement unit is required during this One (1) year period, return the unit to your local NAPA Auto Parts Store for a
replacement. This warranty does not apply to products which have been subjected to abuse, misuse, modification, neglect, lack of
maintenance, use in a production-related service, or repaired by anyone other than an Authorized Carlyle Air Tool Service Center.
For complete listing of Authorized Master Repair Centers, see enclosed Customer Warranty Repair Form, or
visit www.toolwarrantyrepair.com
PLEASE REVIEW ALL WARNING INSTRUCTIONS PRIOR TO OPERATION. SAVE THIS MAN U AL FOR FUTURE REF ER ENCE.
6-1012A
in
the
tion, safety goggles should always be
used to guard against flying rust and
operat-
chips. When using tool, regulate the
speed so that the chisel is not being
if
this
driven out of the cylinder. If piston
is allowed to strike the cylinder wall,
internal damage will result.
are
not
safe-
To change chisel, pull back on the
retainer and insert chisel. Release
To
avoid
retainer.
never
To regulate air, turn air regulator knob
out for maximum air pressure and in
for minimum.
This Carlyle Air Tool is warranted against defects in material and workmanship for a period of One (1) Year
Specifications
Weight ................................... 5.4 Lbs.
Length ....................................... 10.6"
Blows per minute ............. 2,500 BPM
Bore Diameter ............................. 3/4"
Chisel Shank Opening ............... .401"
Piston stroke ............................3-3/4"
Sound Level ......................... 110 dBA
Vibration Level ....................15.6 m/s2
Air Inlet ................................ 1/4"NPT
Min. Hose Size .....................3/8" I.D.
Avg. Air Cons. ....................18 SCFM
5
Rev. 09/18/19
Publicidad
