Publicidad
Idiomas disponibles
Idiomas disponibles
How to Assemble the Light Kit or Cap (continued)
3.
(Option A--for use with light kit)
Securely attach 9-pin connector from motor
assembly to wiring harness socket within light kit
assembly. Assemble the light kit assembly to the
light plate assembly using the previously removed
screw in Step 2.
(Figure 3)
WARNING
The color labels on these two connectors must
correspond to each other.
4. Secure the glass to light plate assembly by twisting
in a clockwise direction. Do not over-tighten. (Figure 4)
5. (Option B--for use with steel cap)
Remove the LED assembly from the switch housing
assembly by remove three screws and unplug the
2 single pin connectors. (Figure 5)
6. Securely attach 9-pin connector from motor
assembly to wiring harness socket within switch
housing assembly. Assemble the switch housing
assembly to the light plate assembly using the
previously removed in Step 2. (Figure 6)
WARNING
The color labels on these two connectors must
correspond to each other.
7. Assemble the steel cap assembly to the switch
housing assembly by twisting in a clockwise direction.
(Figure 7)
Light Plate Assembly
Glass
Switch Housing
Assembly
LED Assembly
Light Plate
Assembly
Switch Housing
Assembly
Steel Cap
Assembly
11
Motor Assembly
Light Kit Assembly
Figure 3
Light Plate Assembly
Figure 4
Figure 5
Motor Assembly
Figure 6
Switch Housing
Assembly
Figure 7
Publicidad
