Publicidad
Idiomas disponibles
Idiomas disponibles
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table below and on page 23.
1
Enter the PSM settings.
2
Select a PSM item.
Indications
Item
(
DEMO
• DEMO ON
Display
demonstration
• DEMO OFF
CLOCK DISP *
1
• CLOCK ON
Clock display
• CLOCK OFF
CLOCK HOUR
1 – 12
Hour adjustment
CLOCK MIN
00 – 59
Minute adjustment
CLOCK ADJ *
2
• AUTO
Clock adjustment
• OFF
TIME ZONE *
*
2,
3
—
Time zone
DST *
*
2,
3
• DST ON
Daylight savings
time
• DST OFF
22
Setting, [reference page]
: Initial)
: The display demonstration will be activated automatically if no
operation is done for about 20 seconds, [4].
: Cancels.
: The clock time is shown on the display at all times when the power is
turned off.
: Cancels; pressing DISP will show the clock time for about 5 seconds
when the power is turned off, [4].
[Initial: 1 (1:00)], [4].
[Initial: 00 (1:00)], [4].
: The built-in clock is automatically adjusted using the clock data
provided via the satellite radio channel.
: Cancels.
: Select your residential area from one of the time zones for clock
adjustment.
EASTERN, ATLANTIC, NEWFOUND, ALASKA, PACIFIC, MOUNTAIN,
CENTRAL
: Activates daylight savings time if your residential area is subject to
DST.
: Cancels.
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.
Publicidad
