cecotec Bolero DRESSCODE 8600 Manual De Instrucciones página 31

ENGLISH
Display (5)
The display shows the settings, estimated time remaining, options, and status messages of
the washing machine. The display will remain on through the cycle.
Fig. 23.
Selectable options
Delay (1)
To set the delay function:
Select a programme.
Press the Delay button to choose the time (the delaying time is 0-24 H.).
Press Start/Pause to activate the delay operation.
Cancel the Delay function:
Press the Delay button until the display be shows 0H. It should be pressed before starting the
programme.
If the programme has already started, switch off programme to reset a new one.
Stains (2)
The washing time will increase or decrease after it is selected.
Note: In case of a break in the power supply while the machine is operating, a special memory
stores the selected programme and when the power is restarted, the program will continue.
My cycle (3)
Use this option to save the most frequently used programmes.
After choosing the programme and setting the desired options, hold down (3) for 3 seconds
before starting the washing programme. The default setting is cotton.
Temperature (3)
Press this button to select the desired temperature (Cold, 20 ºC, 30 ºC, 40 ºC, 60 ºC, 90 ºC).
Speed (4)
Press this button to select the desired speed: 0-400-800-1200-1400.
Function (5)
Use this button to select the desired option: Pre-wash, Extra-rinse, Extra-wash, Night wash
or Anti-crease.
Option confirm (6)
Press this button to confirm any of the selected options: Pre-wash, Extra-rinse, Speed wash,
60
Extra-rinse or Anti-crease.
Reload
This option can be activated during the washing cycle, when the drum is still rolling and there
is a large amount of water with high temperature in the drum.
The operation can be unsafe if the door is opened forcefully.
Hold down the Start/Pause button for 3 seconds.
Wait until the drum stops rotation.
The door lock unlocks.
Introduce clothes.
Close the door when the clothes are reloaded and press the Start/Pause button.
Child lock
Hold down buttons (5) and (6) for 3 seconds, the device will beep indicating the Child lock
function is activated. This function is designed to prevent children from misusing the appliance.
When the Child lock is activated and a program starts, the Child lock indicator will switch on,
and the CL and remaining time on the display are alternately displayed every 0.5 s.
Every time a button is pressed, the Child lock indicator will flash for 3 seconds.
When a program finishes, CL and END alternate for 10 seconds every 0.5 s, and then the Child
lock light will flash for 3 seconds.
To cancel the Child lock function, hold down both buttons for 3 seconds again.
The "Child Lock" will lock all buttons except for the Power button and the Child Lock button.
Deactivate the Child lock function before selecting a programme and starting washing.
Display settings
Fig. 24
These options will light up when selected for a washing cycle.
Pre-wash 1
The Pre-wash function is used to perform an extra-wash before the main wash cycle. It is
suitable for washing the dust on the surface of the clothes.
Pour detergent into the Case (I) to select this function.
Extra wash 2
Select this options to wash very dirty clothes. During this cycle, the washing time and intensity
will be increased.
Speed wash 3
Select this option to activate a washing cycle with reduced time.
BOLERO DRESSCODE_8600 INVERTER / 9600 INVERTER / 9600 INVERTER STEEL / 12600 INVERTER
ENGLISH
61